• Water supply
• Cooling water & hot water
• Fire-fighting systems
• Swimming pool water
• Sprinkling
• Irrigation
• Brackish water
• Condensate
• Air-con systems
• Drinking water
• Chemicals & Oils
• Power Plants
• Shipping Industry, Sea water

• Capacity up to 3000 m³/h (Standard Product)
• Capacity Extension up to 15000 m3/h (Custom Made Design)
• Total Head up to 240 m
• Temperature -30^oC to +140^oC
• Pressure up to 25 bar

• Pump casing is of the volute type fitted with easily renewable casing wearing rings.
• All impellers are double suction type, dynamically balanced according to ISO 1940 class G 6.3.
• Shaft rotates in grease lubricated anti friction bearings (2 Pcs for Horizontal Version). In vertical Version Upper bearing is of the roller type and there is a guide bearing at pumps bottom
• Standard sealing arrangement is a packed gland for temperatures up to 110°C. For temperatures up to 140°C Mechanical seals are used.

• In horizontal version, Pump and motor mounted on fabricated steel base frame which must be fixed with foundation bolts on a concrete base and subsequently grouted in. base frames are constructed from welded profile sections.
• In vertical version pump is mounted between a base frame and the motor stool all aligned.

• Flexible coupling with pins and rubber is used. If the pump housing, motor or the entire unit is moved, alignment is always necessary.
• All couplings are supplied with a guard.

• Standard materials: Cast Iron, Ductile Iron, Bronze Alloys
• Special Materials: Stainless Steel, Duplex Stainless Steel, Austenitic Ni-Resist Cast Irons

• Capacity up to 5000 m3/h
• Head up to 15 m
• Flexibility in design

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Single stage mono-block centrifugal "IN-LINE" pump for clean water
• Standart electric motor of mounting V1
• Equal diameter suction - discharge on same line
• High quality mechanical seal
• Flanges according ISO 7005-2/PN16
• Easy dismount without disconnecting from the main grid
• Horizontal or vertical mounting

• Industry
• Cold / hot water
• Air conditioning
• Circulation
• Marine

• Capacity up to 300 m³/h
• Total head up to 90 m
• Temperature up to 140^ο C
• Pressure up to 10 bar

• Asynchronous electric motor, insulation class F , IP 55 , mounting V1 , 50/60Hz , 400/440V
• Electric motor uppon customer specification such as IP55
• Unit can be delivered with VFD
• Unit can be delivered with AIR-EJECTOR

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Vertical musltistage centrifugal "in line" pump for clean water
• AISI 304 stainless steel construction
• High efficiency, longlife, simple maintenance
• Special three phases electric motor, 2850 rpm,50 Hz, IP 55 acc EN IEC, insullation class F
• Shaft sealing with mechanical seal silicon/carbide, O-rings for pump
• Suction and discharge paralles ( in- line ) acc DIN , AISI 304
• Low noise level , small installation configuration

• Booster sets
• Fire fighting
• Irrigation
• Water treatment
• Air conditioning
• Washing systems
• Circulation of cooling water
• Marine application

• Capacitty up to 80 m³/h
• Head up to 250 m , envirment temperature up to 50^ο C
• Liquid temperature range -15^ο C up to 120^ο C
• Max operation pressure up to 30 bar

• Letter (S) refers to AISI 316 stainless steel construction
• Units can be deliverd with VFD of series EQ up to 22 kW
• Units can be delivered with special motor requirements (explosion proof, 60 Hz etc.)

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Multistage centrifugal pump, horizontal or vertical installation
• Suction, axial (AS series ) or radial ( Η series )
• Discharge horizontal or vertical
• Construction materials : Cast iron GG, bronze G-CuSn, G-S,Stainless steel G-AISI 304-316

• Industry
• Water works
• Boiler feed
• Irrigation
• Air conditioning systems
• Sprinkler intallations
• Marine (special construction)
• Fire fighting
• Circulation of ho, cold water with low or high pressure

• Capacity up to 550 ³/h
• Total head up to 350 m
• Temperature range -2^οC to 14^οC
• Max Casing pressure up to 40 bar

• Bronze or stainless steel construction also available
• Sealing with packing gland or mechanical seal
• Asynchronous electric motor, insulation class F, IP 55, mounting B3, Β5 or V1, 50/60Hz, 400/440V
• Unit can be delivered with VFD

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Concrete volute casing and suction bell
• Corrosion and erosion resistance
• Pull out assembly with guide vanes
• High flow rates
• Low wear rates
• Low total life cycle cost
• Smooth operation
• High efficiency (higher than conventional pumps)
• Prefabricated parts with or without steel liner

• Flood control systems
• Irrigation
• Drainage
• Water diversion
• Seawater intake
• Dry dock dewatering
• Large scale cooling water systems
• High flow water intake systems
• High flow transfer systems

• Capacity* : up to 105000 m³/h
• Head* : up to 35 m
• Speed* : 100 - 300 rpm
• Temperature* : 50 °C max

*For operating data outside the above values, please contact DP PUMPS.

• Round, trapezoid, or rounded rectangle type of volute
• Cast-in casing, Prefabricated concrete parts casing, Steel liner prefabricated parts, or Prefabricated concrete with steel liner casing
• Semi-open or closed type impellers
• Use of guide vanes for reducing the radial thrust and the flow velocity with simultaneous increase of the efficiency
• Expertised design of the suction box with use of hydrodynamic entry cone and optional use of steel liner

• Capacity up to 10000 m3/h
• Total Head up to 400 m
• Special first stage for low NPSHr
• Mixed Flow for high capacities
• Radial Flow for high head
• API 610 latest edition available (VS-6 type)

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Capacity up to 15000 m3/h
• Total Head up to 40 m
• Temperature up to 120º C
• Available in Horizontal & Vertical Arrangement

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Single stage end suction centrifugal pump
• Volute type casingwith easily renewable wear rings
• Impeller dynamically balanced according to ISO 1940 class 6.3
• Axial suction and radial discharge.
• Packedglandfortemperaturesupto 110^οC (standard arrangement)
• Mechanical seal for temperatures up to 140^οC
• Complete bearing assemblyincluding impeller and shaft seal which can be dismantled without removing the volute casing from the pipe system (back-pull-out)
• Mounting Horizontal

• Water supply
• Industrial
• Irrigaion
• Cold / hot water
• Oils
• Cooling
• Fire fighting systems
• Marine–special Construction

• Capacity up to 550 m³/h
• Head up to 100 m
• Temperature up to 110^οC with packing gland and up to 140^οC mechanical seal
• Working pressure up to 16 bar

• Electric motor used at units are asynchronous, F insulation Class, enclosure IP55, B3 mounting, 50Hz, 400V
• Units can be delivered with special electric motors uppon request such as IP56 etc.
• Units can be deliverd with VFD systems

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Capacity up to 1600 m3/h
• Head up to 160 m
• Temperature up to 140º C
• Working pressure up to 16 bar

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Single stage end suction centrifugal pump
• Volute type casing with easily renewable wear rings
• Impeller dynamically balanced according to ISO 1940 class 6.3
• Axial suction and radial discharge or equal diameter suction - discharge on same line
• Packed gland for temperatures up to 110 οC (standard arrangement)
• Mechanical seal for temperatures up to 140 οC
• Mounting vertical

• Water supply
• Industrial
• Irrigaion
• cold / hot water
• Oils
• Cooling
• Fire fighting systems
• Marine – special Construction
• Air conditioning
• Circulation

• Capacity up to 2500 m³/h
• Head up to 150 m
• Temperature up to 110^οC with packing gland and up to 140^οC mechanical seal
• Working pressure up to 16 bar

• Electric motor used at units are asynchronous, F insulation Class, enclosure IP55, B3 mounting, 50Hz, 400V
• Units can be delivered with special electric motors uppon request such as IP56 etc
• Pumps can be delivered with AIR EJECTOR

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Single stage end suction centrifugal pump
• Volute type casing with easily renewable wear rings
• Impeller dynamically balanced according to ISO 1940 class 6.3
• Axial suction and radial discharge
• Packed gland for temperatures up to 110 ºC (standard arrangement)
• Mechanical seal for temperatures up to 140 ºC
• Mounting vertical

• Water supply
• Industrial
• Irrigaion
• Cold / Hot water
• Oils
• Cooling
• Fire fighting systems
• Marine – special Construction

• Capacity up to 1000 m³/h
• Head up to 100 m
• Temperature up to 110º C with packing gland and up to 140ºC mechanical seal
• Axial suction and radial discharge
• Working pressure up to 16 bar

• Electric motor used at units are asynchronous, F insulation Class, enclosure IP55, B3 mounting, 50Hz, 400V
• Units can be delivered with special electric motors uppon request such as IP56 etc

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Capacity up to 60000 m3/h
• Total Head up to 100 m<
• Mixed Flow for high capacities
• Radial Flow for high head
• Pre-Fabricated Parts
• Assembly on Site

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Heavy construction
• Casing of the volute type fitted with easily renewable casing wearing rings
• Suction volute design with vertically arranged radial discharge branch
• Sealing with packed gland up to 110°C or mechanical seal up to 140°C
• Easy removable  without disconnecting suction or delivery pipe work(back-pull-out system )
• Horizontal arrangement
• Closed or open impeller dynamically balanced acc to ISO 1940 class G 6.3
• Heavy duty oil ball bearings in overhung housing flanged to pump casing

• Water Supply
• Industry
• Agricultural
• Public purposes
• Irrigation and drainage
• Booster Stations
• Water process
• Circulation
• Marine– Special construction
• Sea water
• Drinking water
• Condensate

• Capacity up to 2500 m³/h
• Total head up to 150 m
• Temperature - 30^οC to +140^οC
• Pressure up to 16 bar

• Electric motors used for NA units are acc to ENIEC, 3 Phs , asynchronous , insulation class F,IP55,frequency 50Hz , voltage 400V also available with 60Ηz / 440 V
• Na units can be delivered with VFDs (INVERTER)

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Capacity up to 2200 m3/h
• Total Head up to 320 m
• Max. Working Pressure 40 bar
• Temperature up to 350 °C
• Heavy Duty design, acc API-610 latest edition
  available (-2 type)

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Capacity up to 1000 m3/h
• Total Head up to 2250 m
• Max. Working Pressure 250 bar
• Temperature up to 200 °C
• Heavy Duty design, acc API-610 latest edition
  available (-4, -5 types)

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Single stage end suction centrifugal pump oversized
• Volute type casing with easily renewable wear rings
• Impeller dynamically balanced according to ISO 1940 class 6.3
• Axial suction and radial discharge.
• Packedglandfortemperaturesupto 110^οC (standard arrangement)
• Mechanical seal for temperatures up to 140 οC
• Complete bearing assembly including impeller and shaft seal which can be dismantled without removing the volute casing from the pipe system (back-pull-out)
• Suction and dicharge flanges 10/16 bars, according to DIN2501, EN 1092-2

• Water supply
• Industrial
• Irrigaion
• Cold / hot water
• Oils
• Cooling
• Fire fighting systems
• Marine– special Construction

• Capacity up to 1500 m³/h
• Head up to 150 m
• Temperature up to 110^οC with packing gland and up to 140^οC mechanical seal
• Working pressure up to 16 bar

• Electric motor used at units are asynchronous, F insulation Class, enclosure IP55, B3 mounting, 50Hz, 400V
• Units can be delivered with special electric motors uppon request such as IP56 etc.
• Units can be deliverd with VFD system

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Capacity up to 2000 m3/h
• Total Head up to 250 m
• Max. Working Pressure 50 bar
• Heavy Duty design, acc API-610 latest edition
  available (OH-1 type)

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Simple mounting no foundation required
• No Stuffing Box
• Automatic operation with float switch
• Robust Construction
• Volute Casing
• Easy cleaning through suction and volute cleaning holes

• Unscreened Sewage
• Excavations and quarries
• Industrial Wastes
• Food processing and breweries
• Liquid with large solids and stringy materials
• Sludge and viscous liquids

• Capacity up toι : 15000 m³/h
• Total Head up to : 80m
• Non clogging single or double and vortex type impeller

• Casted Parts: Cast Iron, Bronze Alloys, Stainless Steel, Duplex & Super Duplex Stainless Steel
• Fabricated Parts: Steel , stainles steel , Duplex & Super Duplex stainless steel

• Drainege rainwater
• Irrigation water
• Industry water
• Water conservancy
• Flood Control
• Power plant cooling systems

• High efficiency, capacity and head
• Simple construction, less space ned in pumpstations.
• Low level of noise
• Full and sofisticated electric motor protection

• Max. temperature of medium: 40^oC
• Density of medium up to 1.05x10³ Kg/m³
• Medium PH values 5~11
• Submersible depth up to 10 m

• Strong and compact structure with single pump - motor shaft designed for vertical instalation
• Submerible motor , guide vane body, impeller, water inlet horn .
• Sealing with two mechanical seals

• Motor,pump casing,body : GG25
• Impeller, impeller blades: stainless steels or bronze
• Shaft AISI 420
• bolts and nuts: AISI304
• Upper mechanical seal: WuC/Wuc
• Lower mechanical seal : Sic/Sic

• 3 Phs electric squirrel cage induction motor of 400/440 V - 50/60 Hz
• Enclosure Protection IP68.
• Insulation Class F
• Cable length: 10 m.